At the heart of this leak detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity
The new sensor is characterized by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases
For this reason, this sensor was selected and integrated into the 55975 Combustible Gas Leak Detector
In addition, a powerful microprocessor was integrated into the design that automatically selects the best operating condition for the sensor to ensure optimum performance throughout its life.
IntellaSense III Combustible Gas Leak Detector comes in a blow molded case with 2 �C� batteries, leak test vial and replacement filters
SPECIFICATIONS:
Detects combustible gases (see below)
Heated tin oxide sensing element
2000 hour sensor life
Less than 1 second respond time
50 � 1000 ppm ultimate sensitivity
Battery: 2 �C� Alkaline 6000 mAh batteries
Operating Temperature Range: 0DegF to 120DegF
Intelligent tip 15?� inch probe length with environment sensing element to eliminate the potential of false alarms
Six vertical LED display with enabled selectively (red, yellow or green) to display information to the user such as the relative signal level of the detected leak, the selected sensitivity range (low/medium or high) of the unit, diagnostic information such as low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit
Keypad control with ON/OFF button (push-on/push-off), Volume/Mute button (high, low or mute), Sensitivity button for high, medium and low sensitivity level selection and Peak button when multiple leaks are suspected (push enable/disable)
WARNING: This product can expose you to chemicals including DI(2-ETHYLHEXYL)PHTHALATE (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.