• Press bed height easily adjustable with winch.
• Bed will not drop when handle is released.
• Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.
• Design permits use as both "H" frame and "C" frame press; cylinder can be mounted on frame extension to handle jobs which won't fit between uprights.
• Open-end-Access™ feature enables cylinder to be mounted on outside of press frame for fast bearing removal and more.
• Open-end-Access™ press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
• Off-center pressing loads of full capacity can be applied across entire width of frame.
• Hydraulic gauge and hydraulic fittings are included with presses.
• Includes PE17 Series Pump – 1/2 hp, 115 volt, 60 cycle, single phase.

Specifications

†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 10’ remote motor control.
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172–67/81 dBA; PE21–70 dBA measured at 3 foot distance, all sides.